S5B Beer Brewing Pump
$89.25
Available Option:
S5B 24V 14L
- 24 Volts – 12.96 Watts – 1.08 Amps
- Max Flow Rate – 3.7 GPM / 14 LPM
- Max Head – 9.84 Feet / 3 Meters
In stock (can be backordered)
Description
Additional information and specifications about the S5B Beer Brewing Pump
Download PDF FileSTP file
Download STP FileSpecifications S5B Beer Brewing Pump:
- Max Temperature – 230 F / 110 C
- Static PSI – 145.0 / 10 Bar
- Barbed Fittings
- Inlet / Outlet – 1/2” x 1/2”
- Food Grade
- Submersible
- Can be run directly from PV
Application:
The S5B Beer Brewing Pump is perfect for most circulation pump applications and can do so without connection to the power grid. It is highly efficient and can connect directly to a photovoltaic panel. It is small, efficient and has an extremely low power consumption.
It is designed with a brushless motor which provides a maintenance free and quiet service life. The S5 is perfect for single family home thermal solar systems. It is also an excellent choice for any circulation pump application where conventional power is not available.
Soft start-up:
The S5B Beer Brewing Pump has a soft start-up feature which reduces high in-rush current. When the PV panel provides sufficient power, the pump goes through the alignment phase by turning the rotor into the position required for start-up.
The processor then waits until the capacitor is sufficiently charged. This enables a start-up with minimal power (less than two watt). Cycling due to unsuccessful attempts is minimized. Even after prolonged shutdown, the pump will start reliably.
PV operated:
For solar system loops, the S5B Beer Brewing Pump can be connected directly from a PV panel. The pump slowly starts with the smallest amount of current and pushes the heated water to the storage tank. It is a simple design that eliminates the need for controllers, thermostats, and sensors.
Features of the S5B Beer Brewing Pump:
- DC brushless motor with energy efficiency technology by micro processor
- Highly efficient ECM brushless DC motor
- Can sustain a continuous 24-hour workload with life expectancy of well over 30000 hours
- Soft start at a very low in-rush current
- Convenient when working directly with PV panel
- Durable permanent magnetic rotor/impeller and fine ceramic shaft
- Advanced magnetic drive technology with static-impeller
Dry-running protection:
Drive circuitry can detect little or no liquid in the pump chamber. The dry-run protection stops the pump to prevent damage. If this occurs, the S5 needs to be restarted manually. You can do this by disconnecting and reconnecting the pump to the power supply.
Over voltage protection:
When the voltage is over 28V, the pump will shut off by itself. When the voltage falls below 28V, the pump will restart automatically.
Overload protection function:
The overload protection function means that the pump will automatically stop to prevent damage. It does so when the current is over the rated current. This can happen if the impeller is stuck due to debris. Furthermore, the S5 will automatically restart when the current falls again.
Areas of use for the S5B Beer Brewing Pump:
- Beer brewing
- Liquid transfer
- Solar water heater
- Hot water circulation
- Radiant floor heating
- Air energy water heater
- Portable power supplies
- Hot pump air conditioner
Follow us on Facebook, Twitter, Instagram, and YouTube.
Also take a look at some of our other products: the 1A & 2A AC/DC Adapters, the 20A Solar Charge Controller, the S5 with Stainless Steel Fittings and the 12v 10-Watt and 20-Watt Solar Panels.
If you are looking for anything specific, feel free to contact us and we will be happy to help you!
Reviews
There are no reviews yet.